CEM DT-613, Руководство по эксплуатации

Страница: 8 / 12

7
Changing a Setup Option
1. Press or to scroll to the setup option you
want to change.
2. Press to indicate that you want to change this
setting.
3. Press or until the setting you want to use
appears on the display.
4. Press to store the new setting in memory.
Notes Setup is disabled in MIN MAX mode
Offset
The primary display shows the temperature plus the offset
and the secondary display shows the offset. You can store
individual offsets for T1, T2.
Auto Power Off mode
The thermometer enters sleep mode (default). That is to say,
the meter will automatically shut off after 20 minutes if no
button press occurs for 20 minutes. When the thermometer
is in Setup mode, the display shows SETUP. Press or
to scroll to the ”
SLP
” page. Press to indicate
“
On
” or “
OFF
”. Press or until the setting you
want to use appears on the display. Press to store
the new setting in memory. On (sleep mode on) or 0FF
(sleep mode off).