True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
18
•
•
•
•
•
•
•
•
Handle The Meter Gently And Carefull
Keep The Meter Clean
Use Only Fresh Batteries Of The Recommended Size
And Type
If The Meter Is To Be Stored For A Long Period Of Time
6
Battery Installation
WARNING:
WARNING:
NOTE:
y. Dropping it
can damage the electronic parts or the case.
. Wipe the case occasionally with
a damp cloth. DO NOT use chemicals,cleaning solvents,or
detergents.
.Remove old or weak batteries so they do not leak
and damage the unit.
,
the batteries should be removed to prevent damage to the unit.
To avoid electric shock,disconnect the test leads
from any source of voltage before removing the battery cover.
Turn power off and disconnect the test leads from the meter.
Open the rear battery cover by removing two screws (B)
using a Phillips head screwdriver.
Insert the battery into battery holder,observing the correct
polarity.
Put the battery cover back in place.Secure with the screws.
To avoid electric shock,do not operate the meter
until the battery cover is in place and fastened securely.
If your meter does not work properly,check the fuses
and batteries to make sure that they are still good and that
they are properly inserted.
-1
