TrueRMS
Industrial
MultimeterUser's
Guide
True RMS Industrial Multimeter User's Guide
7
2-3 safety Instructions
This meter has been designed for safe use,but must be
operated with caution.The rules listed below must be carefully
followed for safe operation.
NEVER apply voltage or current to the meter that exceeds
the specified maximum:
USE EXTREME CAUTION when working with high voltages.
DO NOT measure voltage if the voltage on the "COM" input
jack exceeds 600V above earth ground.
NEVER connect the meter leads across a voltage source while
the function switch is in the current, resistance, or diode
mode. Doing so can damage the meter.
ALWAYS discharge filter capacitors in power supplies and
disconnect the power when making resistance or diode tests.
ALWAYS turn off the power and disconnect the test leads
before opening the covers to replace the fuse or batteries.
NEVER operate the meter unless the back cover and the
battery and fuse covers are in place and fastened securely.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
•
•
•
•
•
•
•
•
Function
V DC or V AC
mA AC/DC
A AC/DC
Frequency, Resistance,
Capacitance,Duty Cycle,
Diode Test, Continuity
Temperature
Maximum Input
1000 VDC/AC rms
500 mA 1000V fast acting fuse
10A 1000V fast acting fuse
(20A for 30 seconds max every
15 minutes)
1000 VDC/AC rms
1000 VDC/AC rms
Input Protection Limits
