HEAT/LIGHT/VENT INSTRUCTIONS
USER INSTRUCTIONS
Your Heat/Light/Fan unit comes with a wall switch included. Once wired correctly by your
electrician you need to simply follow the below instructions.
To turn the centre light bulb on press the
“LIGHT” switch down (and up to turn off).
To turn the ventilation fan on press the
“FAN” switch down (and up to turn off).
To turn 2 heat lamps on press one of the
“HEAT” switches down (and up to turn off).
To turn all 4 heat lamps on press both of the
“HEAT” switches down (and up to turn off).
Air Flow Requirements:
For maximum efficiency to remove steam and odours, there must be an adequate air flow within
the room. To obtain maximum air flow ensure there is a gap under doors or open windows
slightly. A good test for this is that the fan should not change speed (or sound) when you close
or open the bathroom door.
Important Note:
Always turn the fan on when using the heat lamps to minimise any undue
heat build up in the unit.
