OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure
all packaging has been removed from the unit before use. This appliance requires no installation, it
should be used solely as a portable appliance.
WARNING Keep all objects at least 1 metre from the front, sides and rear of the appliance.
WARNING: Never leave this heater unattended.
HEAT CONTROL SWITCH
The control switch positions are:
“0” = OFF
= Fan Only
Check that the heat control switch is set to Off position before plugging the heater into the mains supply.
For greater economy, use the High Heat setting initially and then switch to the Low Heat setting.
THERMOSTAT
Turn the thermostat knob clockwise until you reach the maximum temperature on the graduated scale.
When the desired room temperature is reached, slowly turn the knob anti-clockwise until the heater turns
off (you will hear a click). The heater will now cycle on and off to maintain the set temperature.
CAUTION
The Fan Heater generates heat during use. Proper precautions must be taken to prevent the risk of burns,
scalds, fires or other damage to persons.
Do not use this heater with a programmer, timer, separate remote-control system or any other device that
switches the heater on automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
SAFETY DEVICE
This appliance has three protection devices:
The first device will automatically turn the appliance off if the appliance is not in the appropriate operating
position.
The second device automatically disconnects & reconnects the appliance at a pre-set temperature.
The third device disconnects the appliance permanently in case of overheating, by means of a thermal fuse
(it is non resettable).
WARNING: In order to avoid overheating, do not cover the heater.
“I” = Low Heat
“II” = High Heat
Содержание CELCH130
Страница 2: ......
Страница 3: ...For Model CELCH130 CERAMIC FAN HEATER OPERATING INSTRUCTIONS...
