WALL-MOUNTED ELECTRIC FIREPLACE/HEATER
BFM EUROPE LTD Page 12
HEAT
When the heat icon is selected and blinking, pressing the
or
buttons within 5 seconds will
adjust the heat output between Low Heat (0.75kW) , High Heat (1.5kW) , and OFF (OF) options. If no
buttons are pressed within 5 seconds the heat icon will stop blinking and the heat output will be set to
memory. To adjust again press the cycle button
which will blink the heat icon allowing the heat output
to be changed.
Pressing the cycle button
switches between heat output and room temperature setting.
When the temperature display
blinks use the
or
buttons within 5 seconds to set the desired
room temperature (18
℃
to
27
℃)
NOTE: If the set handset temperature is below the current room temperature then the heater
will not operate until the room temperature has dropped. The product has a 10% tolerance
on cycle temperature
To switch the temperature display between Celsius and Fahrenheit, press and hold the
button for 5
seconds.
SIDELIGHT
This is not available on this fire.
Setting the Clock
Press and hold the cycle button
for 5 seconds until the day number flashes. Using the
or
buttons set this between 1 and 7 to represent the current day of the week (1 – Monday, 2 Tuesday, 3
Wednesday etc.)
Press the cycle button
to highlight the TIME hour display and set using the
or
buttons.
Press the cycle button
to highlight the TIME minute display and set using the
or
buttons.
Leave for 5 seconds to lock in the settings.
Energy saving function
If the heater detects a drop in temperature caused by an open window or door whilst in heat mode it will
shut off the heater followed by 3 beeps. To restart the heater press the flashing heat button.
