WALL-MOUNTED ELECTRIC FIREPLACE/HEATER
BFM EUROPE LTD Page 13
IMPORTANT
This appliance is fitted with an automatic thermal cut-out safety feature to reduce the risk of damage to
the appliance in the event of overheating e.g. when covered. If the thermal cut out has detected an
abnormal temperature rise within the appliance it will shut off the fan heater and will prevent it from
restarting.
If this occurs switch off the fire using the ON/OFF switch, unplug from the socket and allow the appliance
to cool. Ensure that there are no obstructions to the fan heater outlet or fan blades etc. Once cool, the
thermal cut-out will have reset allowing you to continue safely using your fire.
If the heater is still not operating correctly after 20 minutes disconnect the appliance and call customer
service.
· Always remove the plug from the socket-outlet and allow the heater to cool down before cleaning it.
· Wipe the exterior surface of the appliance occasionally with a soft damp cloth (not dripping wet) and
dry the exterior surface before operating the heater.
WARNING!
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior to get wet as this could create a hazard.
· Light accumulated dust may be removed from the appliance with a soft dry cloth.
· To store away the appliance put it back in to its original packaging and store it in a clean dry place.
· In the event of malfunction do not try to repair the heater yourself as this may result in a fire hazard or
electric shock.
NOTE: The blower motor and flame motor are pre-lubricated for a durable period of time and need no
further lubrication or maintenance. As the dust particles will accumulate on/in the fireplace
,
so
periodic
cleaning/ vacuuming of the fireplace is recommended.
MAINTENANCE INSTRUCTIONS
