Cellink INKREDIBLE, Руководство пользователя

Страница: 61 / 68

61
4. Adjust the X position of printhead one until it is right above the probing
sensor by following these steps:
-Select “Move Axis” and enter by pressing the control knob [8].
-Select “Move 0,1mm” and enter by pressing the control knob [8].
-Select “Move X” and enter by pressing the control knob [8].
-Jog the X-axis by turning the control knob [8] until PH1 nozzle is in
the centre of the metal cantilever of the sensor.
5. Adjust the Y position of printhead one until it is right above the probing
sensor by following these steps:
-Select “Move Axis” and enter by pressing the control knob [8].
-Select “Move 0,1mm” and enter by pressing the control knob [8].
-Select “Move Y” and enter by pressing the control knob [8].
-Jog the Y-axis by turning the control knob [8] until PH1 nozzle is to
the round part of metal cantilever of the sensor.
6. Return to the “Utilities Menu” and select the option “Set Probe Position” by
pressing the control knob [8].
7. Restart the INKREDIBLE 3D Bioprinter.
8.2.11 Pressure monitor not displaying correct pressure
The issue is most likely that the 0-level for pressure has been offset. To fix this, do the
following:
1. Press and hold the buttons on both sides of the middle button on the
pressure display until the pressure monitor’s 0-level has been reset.