Cellink INKREDIBLE, Руководство пользователя

Страница: 25 / 68

25
5.2.5 Starting the print:
1. The INKREDIBLE 3D Bioprinter is now ready to bioprint! Start by inserting your SD-
card, containing the 3D model you want to print, into the SD-card reader [6].
2. In the menu, turn the control knob [8] to “Bioprint” and press to enter. If the “Bioprint”
option does not show up in the menu, control that your SD-card is properly inserted
and use the control knob [8] to select “Reload SD-card”. This should make the “Bioprint”
option available in the menu.
3. Use the control knob [8] to select the model you wish to print and push to
start the bioprinting process.
The bioprinting process is now running! The pressure can be adjusted during bioprinting
process in order to have continuous flow, simply turn the pressure regulators [11a] and
[11b]. Once the bioprinting process is completed the printbed will lower.
WARNING! The INKREDIBLE 3D Bioprinter includes moving parts that can
cause injury. Never reach inside the INKREDIBLE while it is in operation.
Always allow the INKREDIBLE 3D Bioprinter to come to a complete stop
prior to reaching inside.
CAUTION! Never leave the INKREDIBLE 3D Bioprinter unattended during
operation!
You can try bioprinting any of your bioinks or hydrogels. Simply, load it in the cartridges
and configure your bioprinting parameters (printing pressure and printing speed).
Configurations, pressure adjustments, and any development of printable biomaterial is
your responsibility. CELLINK is not responsible for any clogging or damages caused by
any user-dependent biomaterial bioprinted with your INKREDIBLE 3D Bioprinter.