Cellartec CT12TSD, Инструкция по установке, эксплуатации и уходу

Страница: 5 / 35

- 4 -
Features and Specifications
•
CELLARTEC ceiling mount split cooling systems CT14~34TSD are designed
and used to provide a cold temperature between 50~65 °F for a properly
insulated wine cellar.
•
The wine cellar will maintain humidity range within 50~70% RH.
•
These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
•
TSD units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
•
TSD condensing units can be located away from the wine cellars 50 ft so that
noise and compressor vibration are isolated.
•
TSD evaporator units provide two way air supply operation. The evaporator
units can be installed on the ceiling in the center of a wine cellar.
Fig. 1 TSD Ceiling Split Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55
° F, 75 ° F and 90 ° F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55
° F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.