CEL Power8 workshop, Руководство пользователя, Страница: 47 / 86

Replacing the Light Bulb
WARNING . The halogen light immediately
begins to heat up when it is being used. Please
handle the halogen light with care especially
around the light bulb and lens. Extra caution
should be taken when replacing the light bulb.
Allow the light to cool down before attempting to
change the light bulb.
To change the light bulb, hold the top of the light
with one hand and the rim of the halogen light
lens with the other. Start turning the rim of the
lens in a counter clockwise direction.
Continue to turn the rim until it separates from
the body of the halogen light. Handle with care
when doing this to avoid damaging the reflector
or the protective lens.
The burnt out bulb should be removed from the
spring and discarded appropriately.
This halogen light is shipped with a spare light
bulb. It is stored inside the light assembly. You
can see it when you remove the rim and light
assembly. Replace the new bulb in the spring.
Carefully align the rim and light assembly with
the halogen light body. Twist the lens rim in a
clockwise direction to reattach the lens cover.
Cleaning
1. Clean the halogen light regularly. Before
cleaning, remove the battery pack and any
accessories. To clean use ONLY a mild
soap and damp cloth on the housing. Never
immerse the halogen light in water or any
kind of liquid.
2. Remove dust and dirt regularly. Cleaning is
General Inspection
Regularly check that all the fixing screws are
tight. They may vibrate loose over time.
CAUTION. Do not use cleaning agents to clean
the plastic parts of the halogen light. A mild
detergent on a damp cloth is recommended.
Water must never come into contact with the
halogen light.
best done with compressed air or a rag.
3. Do not open the halogen light (other than to
change the light bulb as described above)
Halogen Light - Maintenance
8.3
9. Case