manualshive.com logo in svg

CEL Power8 workshop, Руководство пользователя, Страница: 43 / 86

Поделиться
Скачать
CEL Power8 workshop Скачать руководство пользователя страница 43

Jigsaw - Maintenance

7.4

Changing the blade

WARNING.

  Always ensure that the saw is 

switched off and the POWERhandle is detached 
from the tool before making any adjustments.

1. To fit the blade, loosen the 2 hexagonal 
screws on the blade clamping block. 

2. Slide the blade into the locating groove with 
the teeth pointing forward. 

3. Tighten the hexagonal screws with the 
included hexagonal key.

WARNING.

  The teeth of the jigsaw blade 

should be pointing forward away from the user. 

IMPORTANT

.  After replacing the saw blade, 

make sure that the hexagonal screws are firmly 
tightened and the blade is running freely.

Re-attach the POWERhandle and run the saw 
under no load to check that it runs smoothly 
before using it to cut any material.

General Inspection

Regularly check that all the fixing screws are 
tight.  They may vibrate loose over time.

8. Halogen Light

Jigsaw blade fitment type:

(Universal Type)

Содержание Power8 workshop























































































Отзывы:

Нет отзывов