CEFLA NewTom 5G Vet, Руководство по присоединению, Страница: 56 / 68

10 APPENDIX A- Technical references
Clause 6.8.3.201 Technical Description - Tab 202 Guidance and manufacturer's declaration
- electromagnetic immunity - for all equipment and systems
TABLE: Guidance and manufacturer's declaration - electromagnetic immunity
The device NewTom 5G Vet is intended for use in the electromagnetic environment specified below. The
customer or the user of the device NewTom 5G Vet should assure that is used in such an environment.
Immunity test IEC 60601 Test level Compliance level Electromagnetic environment -
guidance
Electtrostatic discharge
(ESD)
IEC 61000-4-2
± 6 kV contact
±8 kV air
6 kV contact
8 kV air
Floors should be wood, concrete, or
ceramic tile.
If floors are covered with synthetic
material the relative humidity should be
at least 30 percent.
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for power supply lines
±1 kV for input/output lines
2 kV
1 kV
Mains power quality should be that of a
typical commercial and/or hospital
environment.
Surge
IEC 61000-4-5
±1 kV differential mode
±2 kV common mode
1kV
2kV
Mains power quality should be that of a
typical commercial and/or hospital
environment.
Voltage dips, short
interruptions and voltage
variations on power supply
input lines
IEC 61000-4-11
<5% U
t
(>95% dip in U
t
) for 0,5 cycles
40% U
t
(60% dip in U
t
) for 5 cycles
70% U
t
(30% dip in U
t
) for 25 cycles
<5% U
t
(>95% dip in U
t
) for 5 sec
Complies
Complies
Complies
Functions Interruption
Mains power quality should be that of a
typical commercial and/or hospital
environment. If the user of
NewTom 5G
Vet requires continued operation during
power main interruptions, it is
recommended that
NewTom 5G Vet be
powered from an uninterruptible power
supply or a battery.
Power frequency (50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m Complies
Power frequency magnetic fields should
be at least characteristic of a typical
location in a typical commercial or
hospital environment.
10-26 Veterinary Application