CEFLA NewTom 5G Vet, Руководство по присоединению, Страница: 23 / 68

6 Scanning
6 Scanning
Please refer to the paragraph of the same name in the “User Manual”.
6.1 Animal scan
6.1.1 Animal preparation
An important step in a scan routine is well preparing the animal. This can contribute to a proper scanning and
to high quality images.
The aim of such preparing is making the patient relaxed and in a good position before and during the scan.
Here are some suggestions that can help in this concern.
✔
Room setting
Be sure that the scanner unit is clean and ready to scan the animal ( "Daily Check" and "Blank
Acquisition" already performed).
✔
Preparing the animal
Remove any collars or other objects that could enter the scanning area
✔
Accommodating the patient
Position the animal on the patient table , move it in the scan area and adjust the table so as to frame
the interested area and the neck/bust of the animal assumes a correct position.
✔
Avoiding delays
Good examination times can be obtained also by carrying out all the preliminary procedures before
starting the scan itself.
6.1.2 Positioning the animal and starting a new scan
Hereafter is a description of how to position and center a patient inside the scan area. Perform these action
just when the software signals them.
For more details about use of the patient table, please refer to the “Patient Table User Procedures”
document.
WARNING:
The scan area (the place in which a patient is positioned
during the scan) must be free from any objects, except from
the head support. They may damage the patient or invalidate
the scan results.
WARNING:
Pay attention while moving the patient's table in order to
avoid possible collision with object and/or person.
Veterinary Application 6-1