Cedar Summit F24720, Инструкция по установке и эксплуатации

Страница: 45 / 72

45
support@solowavedesign.com
Hardware Wood Parts
Step 20: Lower Slide Wall Assembly
Part 1
A: Place 1 (1808) Short Trim tight to the top of (1987) SL Ground Support flush to the outside edge of (1952)
Long Post on the front Slide Wall side of the assembly. Attach to (1952) Long Post with 3 (S2) #8 x 1-1/2” Wood
Screws. (fig. 20.1 and 20.2)
B: Tight to top of (0348) SL Ground and tight to (1808) Short Trim attach (1852) CE Siding to both (1952) Long
Posts with 2 (S0) #8 x 7/8” Truss Screws as shown in fig. 20.2.
C: Tight to (1852) CE Siding and top of (0348) SL Ground attach 1 (1870) Trim Short to (1952) Long Post with 3
(S2) #8 x 1-1/2” Wood Screws. This will overhang the (1952) Long Post by 5/16”. (fig 20.2)
D: Install 5 more (1852) CE Siding directly above the first, attaching to both (1952) Long Posts with 2 (S0) #8 x
7/8” Truss Screws per board. (fig. 20.2)
E: Tight to the top of both (1808) Short Trim and (1870) Trim Short and flush to the edges of both (1952) Long
Posts, attach (1851) Cedar Floor Board with 4 (S2) #8 x 1-1/2” Wood Screws. (fig. 20.2)
F: Tight to the bottom of (1501) Floor End and flush to the edges of both (1952) Long Posts attach 1 (1867) Top
Side with 4 (S2) #8 x 1-1/2” Wood Screws. (fig. 20.2)
14 x #8 x 1-1/2” Wood Screw
12 x #8 x 7/8” Truss Screw
1 x Top Side 1 x 6 x 38-1/4”
1 x Cedar Floor Board 1 x 5 x 38-3/4”
6 x CE Siding 3/8 x 3-1/2 x 36”
1 x Trim Short 1 x 2-1/2 x 19-5/8”
1 x Short Trim 1 x 2 x 19-5/8”
1867
Fig. 20.2
1952
x 2 per board
S0
Slide Wall Side
Fig. 20.1
S2
1867
1501
1952
1851
1808
0348
1870
5/16” over hang
from post
1852
1808
1870
1852
1851
S2
Front
S0
S2
1952
Flush to edge of post