cecotec CONGA 4690 ULTRA, Инструкция по эксплуатации

Страница: 56 / 165

55
ENGLISH
The robot could not connect to Wi-Fi. The Wi-Fi signal is poor. Make sure the Wi-Fi
signal is correct.
The Wi-Fi connection is unstable. Reset the
router, check if there are any App updates and
try again.
Make sure your device’s mobile data are
deactivated to improve the binding process.
The robot did not carry out the scheduled
cleaning task. Check if the robot is in Night mode and switch
mode. The robot does not carry out scheduled
cleaning cycles under this mode.
Make sure the robot is connected to the
network, it will not be able to carry out
scheduled cleaning tasks without being
connected.
The robot does not return to the charging
base after spot cleaning or after changing
starting position. The robot will map and calculate a new route
after operating under spot cleaning or after
having changed its starting position.
If the charging base is very far away from
the robot, it will not be able to charge back
automatically. Put the robot back on the
charging base manually.
The robot does not resume cleaning. Make sure the robot is not in Sleep mode, it
will not resume cleaning under this mode.
It won’t resume cleaning when it is placed
manually on the charging base.
The robot is always offline. Make sure the robot is successfully connected
to the network and always in the range
covered by the Wi-Fi signal.
Connection between the mobile phone and
the robot failed. Make sure the robot and the charging base
are in an area with good Wi-Fi signal, reset
the router and try connecting them again.
The robot does not operate properly under
Edge mode. Clean the optical sensor with soft cloth, take
the robot to a new location and try again.
9. TECHNICAL SPECIFICATIONS
Product reference: 05553
Product: Conga 4690 Ultra
100-240 V~ 50/60 Hz