BOLERO COOLMARKET 4D 454 / INOX / DARK
73
ENGLISH
2. BEFORE USE
- This product includes a packaging designed to protect it during transport. Take the
refrigerator out of the box. You can keep the original box and other elements in a safe
place, this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
Box contents:
- Bolero CoolMarket 4D 454 Inox/Dark refrigerator
- Instruction manual
3. INSTALLATION
Before using the refrigerator for the first time, you must read these tips.
Warning
For proper installation, the refrigerator must be placed on a level surface of hard material that
is at the same height as the rest of the floor. This surface must be strong enough to withstand
the completely loaded refrigerator.
Refrigerator ventilation
- To improve the refrigerator system and save energy, it is necessary to ensure a proper
ventilation around the refrigerator to dissipate the heat. For this reason, you should leave
enough free space around the refrigerator.
- It is advisable to leave at least 50-70 mm of free space from the rear part of the refrigerator
to the wall, at least 300 mm space from the surface to the ceiling, at least 200 mm from
the side to the wall and a free space in the front part to be able to open the door at 135º.
Check figure 3 for reference.
Note
This refrigerator operates properly in the climate classes SN to T shown in the following table.
If the room temperature is below or above the range for which the refrigerator was designed,
this will not operate properly.
02372_Bolero CoolMarket 4D 454 Inox _IM_YV_01220324.indd 73
02372_Bolero CoolMarket 4D 454 Inox _IM_YV_01220324.indd 73
25/3/22 14:39
25/3/22 14:39