cecotec 05419, Инструкция по эксплуатации

Страница: 29 / 71

ENGLISH
30
WATER INTENSITY/TIME SETTINGS
1.
Water intensity
• Short press to adjust the water intensity during scrubbing mode. Select
between 3: High, 2: Medium o 1: Low. The display will show 1, 2 or 3 and the robot will
emit the number of beeps respectively.
2. Timer settings
• Long press the button to enter the time-settings mode. Use the direction
buttons to select the desired hour and minutes, and then short press to save
the settings.
POWER
• Long press the POWER button for 3 seconds to select the suction power level.
Choose between 3: High, 2: Medium o 1: Low. The display will show 1, 2 or 3 and the
robot will emit the number of beeps respectively.
DIRECTION BUTTONS
During standby mode or automatic cleaning:
• Press to move the robot forward.
• Press to move the robot backward.
• Press for the robot to turn left.
• Press for the robot to turn right.
TIME AND SCHEDULE SETTINGS
The robot’s scheduling must be carried out from the remote control by means of the schedule
button .
1. Schedule
Make sure the robot is switched on and in standby mode.
Entering the schedule mode
• Long press on the remote control for 3 seconds in order to enter the schedule
mode. The display will show the current day and time, the week day will flash and the
time icon will light up. If the current day has been already scheduled, the schedule
button will be lit up.
Setting day
• Use the direction buttons and to select the day from Monday to Sunday, the
selected day of the week will flash.
• Press to confirm the day of the week and the selected day will turn steady.
Setting time
• Once the day of the week has been confirmed, the hour digits will flash. Use the up