BREAD&CO 1500 PERFECTCOOK
BREAD&CO 1500 PERFECTCOOK
61
60
ENGLISH
ENGLISH
6. TECHNICAL SPECIFICATIONS
Product reference: 02229
Product: Bread&Co 1500 PerfectCook
850W, 220-240 V AC, 50 Hz
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old
appliances must be collected separately, in order to optimize the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to
dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they
should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
8. TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the warranty
will not apply.
If at any moment you detect any problem with your product or have any doubt, do not
hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
6
Ingredients not
blending, can hear
motor burning
Bread container or kneading
blade may not be installed
properly. Too many ingredients.
Make sure kneading blade is set
all the way on shaft. Measure
ingredients accurately.
7
Bread does not
rise; loaf short.
Inaccurate measurement of
ingredients or inactive yeast.
Lifting lid during programs.
Measure all ingredients
accurately.
Check expiration date of
yeast and flour.
Liquids should be at room
temperature.
8
Ingredients are not
stirred correctly
and are not
correctly baked.
Wrong program has been
selected.
The bread is dry and the
crust is too light.
Do not open the cover when
rising for the last time.
The kneading blade cannot
stir properly.
Check the kneading blade,
take the bread out and
operate the device without
bread inside it. If it does not
operate normally, contact
Cecotec’s Technical Support.
9
Bread rised too
high or lid pushed
up.
Ingredients not measured
properly (too much yeast,
flour). Kneading blade not in
bread container. Forgot to
add salt.
Measure all ingredients
accurately and make sure
sugar and salt have been
added. Try decreasing yeast by
1/4 teaspoon (1.2 ml). Check
installation of kneading blade.
10
Crust colour is too
dark.
Too much sugar in the recipe. Decrease sugar amount
slightly.
Select a lighter crust option.
11
Bread breaks
down in the middle
when baking the
dough.
Flour cannot make the dough
rise.
Use a stronger flour.
Yeast’s temperature is too
high or it rised too quickly.
Yeast is under room
temperature.
Too much water makes the
dough too soft and wet.
Adjust water on the recipe.
12
Bread weights
too much it is too
dense.
Too much flour or not enough
water.
Reduce the amount of flour or
increase the amount of water.
Too much fruit or too many
whole-wheat flour.
Reduce the amount of
ingredients and add more yeast.
