Ceasa SET&SOFT, Инструкция по эксплуатации

Страница: 10 / 33

10 SHOWER SOFTENER-CEASA
2.2 Remove the expansion screws and stainless steel plate. Use the holes in the
plate as a reference to mark the drilling locations on the wall using the
percussion drill. Our company provides expansion screws for ST3.9 x30, so
we recommend selecting a 6 mm diameter drill bit. When selecting the height
to hang the product, please give priority to what is convenient for you in terms
of adding salt.
2.3 Normally the stainless steel plate can be installed using just four expansion
screws in a diagonal pattern in soft walls, such as wood, lime… Installation
under other special conditions may require more screws. Please refer to figure
1.
2.4 Insert the expansion screw tube into the drilled hole, then use a screwdriver
to fix the plate to the wall, as shown in figure 2, with the raised side facing
outwards.
2.5 Install the unit on the slots of the fixed plate, then complete the hanging
process. The appearance after installation is shown in figure 3.
Figure 1. Install the stainless steel plate
Expansion screw tube
Stainless steel plate
Self-tapping
screw