CEAM IF324, Руководство по эксплуатации

Страница: 18 / 24

IF324_5A808_UK_M1 ® Copyright CEAM Group
CEAM Control Equipment 18
10 – The Software
The Thermometer IF324 is equipped by a Software Utility extremely simple and intuitive, which through its USB gate allows
acquiring the data taken through a PC, as well as other several functions.
At the moment the software which is supplied for free is at disposal only in English language, as it is typical for this kind of
utility products, but as it is so simple it will not be difficult to be used also from people who do not speak English.
Before proceeding in using the software, it is necessary to install it into the PC you intend to use, the procedure is totally
automatic, you need first to install the software, and then connect the thermometer to the USB gate, activating before its
gate (Ref. Par 5.3.5) and then follow the eventual request of the system.
At the end, once you install it correctly, pressing the Trigger of the thermometer, it will be possible to see on the PC the data
taken by the thermometer, both those with technology IF and those taken by the thermocouples if connected.
If everything has been well done, you will see the screen showed here below, where the track in this case blue you can see
on the diagram, represent in this case the value of the temperature taken during time, while on the above part you can see
the actual value, as you can see by the image from the PC it will be possible to visualize also many other information,
relevant to alarms etc etc..
The software is provided by an on line manual, where you can enter in clicking on the icon with the question mark.