CEAM IF324, Руководство по эксплуатации

Страница: 13 / 24

IF324_5A808_UK_M1 ® Copyright CEAM Group
CEAM Control Equipment 13
5.3.3 – Re-Reading Stored Data in LOG - Measure IF (Infrared)
To read again these data proceed as follows:
Keeping pressed the measurement trigger (Ref. Chap.3 – Pos.9), press repeatedly the key
MODE until on the
display it appears the abbreviation LOG (Ref. Chap.4 – Pos. 14), at this point release the trigger, and operating
on the keys UP & DOWN , it is possible to scroll the several memory positions, visualizing them from 1 to 100
on the display in little on the high side (Ref.Chap.4 – Pos.8) , the stored temperature corresponding to the
memory cell is visualized on the display in little on the low side (Ref. Chap.4 – Pos.9)
Note: Not touching anymore any key for at least 7 seconds the instrument switch itself off
5.3.4 – Erasing of the LOG Storage
This function allows to erase quickly all the stored data in the LOG, and to proceed execute the following
procedure:
The erasing can be made only when the instrument is in
LOG , this state is confirmed by the visualization of the
abbreviation on the (Ref. Chap. 4 – Pos. 14), if the display does not visualize this abbreviation, always in
MEASURE , with pressed trigger, press repeatedly the key MODE (Ref.Chap.5 – Pos.4) until it appears the
abbreviation LOG.
Once assured to be in
LOG , always keeping pressed the trigger, pressing repeatedly the key DOWN up to
arriving in visualizing the memory cell 0 , visualized on the display little in the high side (Ref.Chap. 4 – Pos.8),
without releasing the trigger, press shortly the red key Backlighting/Laser (Ref. Chap.5 – Pos.1), the
instrument will confirm the erasing with a double sound note, and the display will visualize the memory cell
1 ,
ready to begin a new storage
5.3.5 – Activation –Deactivation USB Gate to download data
The instrument is supplied by a digital communication USB gate, through which it is possible to download the
stored data to visualize them on the PC.
Activation USB Gate: To activate it, it is necessary that the instrument is in the state
MAX - MIN - DIF - AVG , with
one of these abbreviations visualized on the display (Ref. Chap.4 – Pos.7), then keep pressed for few seconds
the red key Backlighting-Laser (Ref. Chap.5 – Pos.1) until the abbreviation
USB appears in the low right corner
of the display (Ref. Chap.4 – Pos.11).
Deactivation USB gate: To deactivate the function, it is necessary that the instrument is in the state
MAX - MIN -
DIF - AVG , with one of these abbreviations visualized on the display (Ref. Chap.4 – Pos.7), then keep pressed for
few seconds the red key Backlighting-Laser (Ref. Chap.5 – Pos.1) until the abbreviation USB disappears from
the low right corner of the display (Ref. Chap.4 – Pos.11).