8
5. Installation
You must observe the applica-
ble safety requirements for
setting up and operating elec-
trical equipment as well as the
Device Safety Law and
all generally recognised
codes of practice!
5.1 Assembly
Apply bore holes as shown in
Figure 1. Fasten the device in
place with suitable screws.
Tighten the screws only to
finger tightness!
It is also possible to mount the
device on a 35-mm DIN rail.
5.2 Electrical connection
Power connection
The device is designed for
operation at 230 V AC or 24 V
DC. Lines must be connected
as shown in Figure 2.
198
5
137
10
Figure 1: Fastening points
Plug-in slot 2
Figure 2: Power connection
Floating contact
The controller provides a freely
programmable circuit contact (1
- 2 - 3, Figure 2).
Energising of the relay can be
assigned to various events. See
the «Relay settings» menu
1
2
3
Bus cables
The bus line from the con-
nected CEAG systems must be
connected to Terminals A(2)
B(2)
(Figure 3). 4 terminals are
present for each input.
L N PE + – 1 2 3
230 V AC 24 V DC relay
A(2) B(2)
CG-S-Bus (2)
Figure 3: Bus connection
