18
9.7.2.1 Circuit status of ZB-S in line 2
Priority
high
1
Luminaire-search mode AC
2
Luminaire-search mode DC
3
Circuit-learn mode AC
4
Circuit-learn mode DC
5
Durationtest mode
6
Functiontest mode AC
7
Functiontest mode DC
8
Battery mode (Battery emergency light)
9
Mains mode
10
Normal operation mode
low
11
block
9.7.2.2 Circuit failure of ZB-S in line 3
Priority
high
1
DC fuse
2
AC fuse
3
Luminaire failure DC
4
if the measured current of last DC
functiontest differs more than the
permitted difference of learned DC
measured current, which is set up at
the device
(list < lsoll)
5
ISO Failure Plus
6
ISO Failure Minus
7
Luminaire failure AC
8
if the measured current of last AC
functiontest differs more than the
permitted difference of learned AC
measured current, which is set up at
the device
(list < lsoll)
9
if battery voltage of the circuit is under
the low
deep discharge sill
During communication with the system, «Please wait...» is displayed.
If there is an error, the faulty communication process is automatically
repeated. The read process then lasts somewhat longer.
