CLEANING
It is important to keep the appliance clean and in
good working order to ensure optimum quality of
the products and long life of the appliance.
Cleaning of the appliance must be carried out by
persons with knowledge and practical
experience of the appliance
.
At the end of
each working day
, clean the outer
surfaces dirty with coffee (motor housing, tray,
discharge opening etc.). Clean the appliance
completely
at least once a week
.
Always disconnect the plug of the
appliance from the power socket
before cleaning it.
Clean the motor housing and the tray
with a cloth dampened with water or alcohol.
Wipe with a dry cloth.
Never put the appliance under running
water and never immerse in water.
Once the hopper has been removed it can be washed with lukewarm water and neutral soap,
then rinse it and dry well.
-
Use a brush or a paintbrush (Fig. 17) to clean the most hidden areas inside the unit and a dry
cloth for the other surfaces.
MAINTENANCE
Maintenance must be carried out exclusively by qualified technical personnel.
Care for the mechanical and electrical parts of the appliance is indispensable in order to guarantee
their safety and efficiency. If any parts need replaced, authentic spare parts must always be used.
GB
40
TROUBLESHOOTING
(See Table on the next page)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
Centre.
Fig. 17
Содержание E5P
