Main window of a DupliKey40, devices list and Graphic User interface
II. Installation
1) Required Configuration
• Minimum:
Any Intel PC under Windows 7, 8 or 10, 2
GB
RAM minimum, one or two
free PCIe slot(s) (for USB 3.0 card(s)), screen resolution 1650 x 1080.
• Recommended:
PC Intel Quad-core or more,4
GB RAM or more, one to three free
PCIe slot(s) (for USB 3.0 card(s)), screen resolution 1650 x 1080.
• Special 60 ports:
PC Intel i5 ou i7, 6 GB RAM or more, three free PCIe slots (three
USB3 cards), screen height 1500 pixels or more.
2) Hardware
Install USB 3.0 PCI controller board(s) into your system (please, refer to the installation
guide of the controller board). If necessary, also install specific drivers for Windows
operating systems. When the PCI controller board is correctly detected by your system,
plug the DupliKey hardware into the installed USB 3.0 controller board. To do so, simply
connect USB 3.0 cable (or cables, according to your version) of the DupliKey hardware into
one or both external USB ports of the controller board. Power on DupliKey and reboot
your system. Now, your DupliKey system is ready to use. The last thing to do is installing
KeyDuplicator II software.
4