I. Introduction
DupliKey systems (7 to 60 ports) are intended to simplify duplicating a large amount of USB
keys. Copies of files (located on your hard drive) run simultaneously, that is in the same time,
on all plugged keys. This results in a huge time-saver compared to the tiresome key by key
copy. In addition, our software manages copy errors, keys breakdowns, and provides a counter
for successfully duplicated keys. Different versions of this set manage other USB devices like
floppy disk drives and FlashRAM card readers. User friendly and very easy to operate,
DupliKey works with USB 3.0 as well as with USB 2.0 (it’s also compatible with USB 1.1, but
please, take care of copy time, 40 times slower than USB 2!!) Furthermore, hardware and
software as well run on PC under Windows 7, 8 and 10, 32 or 64bit version.
DupliKey is composed of a hardware part and a software part.
1) DupliKey hardware
DupliKey hardware is composed of, depending on the version:
- From one to three USB3.0 hub(s) offering 20 ports each (DupliKey20, 40 or 60) with
a
built-in power supply providing 1A (A-213) or 2,1A (A-223) per port, depending on hub
model.
- One or two A-163 USB 3.0 hub(s) offering 16 ports each (DupliKey16 or 32), providing
500 mA per port,
1
