14
| Instruction Manual
Pyrolytic cleaning
This function heats the oven to approximately 480°C which will burn
off or loosen any stubborn grease, stains or dirt inside the oven,
leaving behind an ash that simply has to be wiped up or swept from
the interior afterwards.
The cleaning process
• Remove
all
items from the oven (baking trays and side racks) as
these can be damaged during the process
• Close the oven door
• Set the function selector knob to the position
• Pyrolytic cleaning duration (
P2.00
) and the symbol will show on
the display. The door indicator light will come on
• Touch for approximately 3-4 seconds until the display shows
0:00
• Touch again, the display will flash
Pdur
• Touch the / sensors to select the duration. You can choose
2 hours, 2 and a half hours or 3 hours. Once you have made your
choice, wait for the beep which confirms the duration has been set
• The cleaning process will start and the oven will be locked
•
P0.00
will show on the display once cleaning is complete
• The door will remain locked until the oven chamber cools down to
160°C. Once the temperature is reached the door will be unlocked
and the door lock indicator light will go out
• When the door lock indicator light is off set the function selector
knob to
0
• When the door is unlocked and you turn off the oven, you can
remove ash from the oven chamber with a soft, damp cloth
• Replace the the side racks and other accesories and your oven is
ready to use
