6
| Instruction Manual
Setting the time
When first connected to the power supply, the digital display will flash
0.00
. The oven will not operate until the time is set.
• Touch and hold (or simultaneously touch and until you see
the dot below the symbol flashing
• Touch or within 7 seconds to set the current time. Once the
desired time is set allow 7 seconds for the dot to stop flashing
followed by a beep. The time can be adjusted again at any time by
pressing and simultaneously and following the same steps
Minute minder
You can activate the minute minder at any time regardless of the
status of other functions. It can be set from 1 minute up to 23 hours
and 59 minutes.
To set the minute minder:
• Touch and hold and the display will show a flashing
• Use the and sensors to set the time desired. The display will
show the set time and the symbol
• Once the set time elapses an alarm will sound and the icon
flashes. Touch and hold either / or to mute the alarm
After approximately 7 seconds the will be off and the display will
show the current time
Please note:
If no button is touched the alarm will turn off automatically after
approximately 7 minutes.
