CDA SC 310 Series, Руководство по установке, использованию и обслуживанию, Страница: 9 / 36

9
Lighting of Gas Grill Burner
IMPORTANT: The oven door must be open during this operation.
To light the burner, you need to:
1 Fully open the oven door.
If this operation is not performed you should not proceed to light the oven.
2 Press the thermostat knob throughly to start up the electric ignition and, keeping the knob under
pressure turn it clockwise (fig. 6) to position
(fig. 3).
Never continue this operation for more than 15 seconds. If the burner has still not ignited,
wait for about 1 minute prior to repeating the ignition.
In case of mains failure, to light the grill manually, put a flame to the right and left side of the bur-
ner (fig. 7), then press and turn the thermostat knob (fig. 6).
3. Wait about ten seconds after the burner lighting before releasing the knob (priming time of the
thermocouple).
4. Check that the burner has lit; if not, turn the knob anti-clockwise back to “ ” (OFF) and repeat the
procedure from step 1.
5. The oven door must always be kept half-open when the grill is in operation.
For correct use see chapter “TRADITIONAL GRILLING”.
If the flame extinguishes for any reason, the safety valve will automatically shut off the gas supply to
the burner.
To re-light the burner, first turn the grill control knob to OFF position
(“ ”)
,
wait for at least 1 minute
and then repeat the lighting procedure.
During and after use of the grill, certain parts will become very hot.
Keep children away.
ATTENTION: In case of manual lighting, never turn the thermostat before approaching a flame
to the burner.
Fig. 7 Fig. 6