CDA SC 310 Series, Руководство по установке, использованию и обслуживанию, Страница: 17 / 36

17
Refitting the Oven Door
− Hold the door firmly (fig. 19).
− Insert the hinge tongues into the slots, ma-
king sure that the groove drops into place as
shown in the fig. 20.
− Open the door to its full extent.
− Fully close the levers “ A ” on the left and right
hinges, as shown in the figure fig. 21.
− Close the door and check that it is properly in
place.
Removing and Replacing the Inner
Door Glass Pane for Cleaning
If you wish to clean the inner glass of the door, make
sure you follow the precautions and instructions
very carefully.
Replacing the glass pane and the door incorrectly
may result in damage to the oven and may void your
warranty.
IMPORTANT!
− Take care, the oven door is heavy. If you have
any doubts, do not attempt to remove the
door.
− Make sure the oven and all its parts have coo-
led down. Do not attempt to handle the parts
of a hot oven.
− Take extreme care when handling the glass pane.
Avoid the edges of the glass bumping against any
surface. This may result in the glass shattering.
− Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they
can scratch the surface, which may result in shat-
tering of the glass.
− If you notice any sign of damage on any of the
glass panes (such as chipping, or cracks), do not
use the oven. Call your Authorised Service Centre
or Customer Care.
− Make sure you replace the glass pane correctly.
Do not use the oven without glass pane correctly in place.
− If the glass pane feels difficult to remove or replace, do not force it. Call your Authorised Repairer
or Customer Care for help.
Note: service visits providing assistance with using or maintaining the oven are not covered by
your warranty.
A
Fig. 19
Fig. 20
Fig. 21