background image

16

Please note: 

The keep warm setting indicators will display the ( ) 

symbol when the 42°C heating level is active, the ( ) symbol will be 
displayed when the 70°C heating level is active and the ( ) symbol 
will be displayed when the 94°C heating level is active. The cooking 
zone indicator will display a 

.

To deactivate the keep warm function

• 

Touch the relevant zone’s keep warm function sensor (13) the  

 

  required number of times until the display reads ‘0’ again.

Please note: 

Any zones that are still hot to the touch will display an 

' ' provided the mains power supply is not interrupted.

Bridge Function

The hob is equipped with a bridge function which allows you to use 
two heating zones with just one zone's controls. This function is 
intended for use with pans such as fish kettles and is available for all 
zones. However, only vertically aligned zones can be bridged.

To bridge zones

Touch both heat setting slider sensors (12) of the zones that you want 
to bridge. A successful zone bridge will be signified by the bridge 
function indicator (4) of both zones illuminating. Only one cooking 
zone indicator (2) will be lit however, and it is this zone’s controls that 
should be used to control the bridge. 

Содержание HN9841FR

































Отзывы: