13
minus and plus setting sensors (5 & 7) repeatedly to cycle through
the zones until the timer activity indicator for the desired zone is
illuminated brightly.
•
Reduce the time on the timer display (6) to 0.00 using the timer
minus setting selector (5). Wait for approximately 4 seconds for the
timer to confirm cancellation before moving on to another zone.
To set the minute minder
•
Switch the hob on using the on/off sensor (9) if necessary.
•
With no heat level set, touch the timer minus setting sensor (5) and
the timer plus setting sensor (7) simultaneously. The timer display
(6), and the clock symbol beneath it, will illuminate. If a heat level
is set, press the minus and plus setting sensors simultaneously
as many times as necessary until the clock symbol between the
timer sensors is lit.
•
Next, use the timer plus setting sensor (7) and the timer minus
setting sensor (5) to set the desired minute minder duration. The
entry will confirm after approximately 4 seconds and begin counting
down.
•
Once the set time has elapsed, an acoustic signal will begin to
sound for approximately two minutes. To cancel this signal, press
the timer minus setting sensor (5) and timer plus setting sensor (7)
simultaneously.
To cancel the minute minder
•
Press the timer minus and plus setting sensors (5 & 7)
simultaneously to activate timer adjustment (signified by solidly lit
decimal point) and then reduce the time on the timer display (6) to
0.00 using the timer minus setting selector (5).
