CDA EVX110, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 24

19
Note: Use a 3A Fuse
Assembly and electrical connection should be carried out by
specialised personnel.
The mains isolation switch should be readily accessible after the
appliance has been installed and it is recommended that the isolation
switch is located within 2m of the appliance, where practical.
This appliance is intended to be connected to the mains electrical
supply by means of an isolation switch and fused spur and is intended
to be protected by a 3A fuse. The use of a 13A fuse can cause
damage to the internal wiring in the event of a fault, and may also
invalidate the warranty.
Electrical information
Mains electrical voltage: 220 – 240Vac
Total rated power consumption: 296W