background image

VX 820 ITS 
Installation & service manual (version 1.0) 
v1.0, Internal 

 

 

 

 
 

Abbreviation / Term 

Meaning 

PIN over open Internet 

The possibility to carry out transactions  by means of an IP 
connection that is not certified by the Dutch payment 

association Betaalvereniging Nederland. 

PIN pad 

The customer part where the card holder enters his PIN code and 

accords with the transaction amount. 

POS 

Point Of Sale (Cash register or cashier’s unit). 

Privacy shield 

Shield around the keypad where the PIN code is entered. 

POS device port 

The port (default: 4102) to which the point-of-sale terminal will 

send data for the POS system. 

POS listen port 

The port (default: 4100) to which the point-of-sale terminal is to 

listen for the POS system commands. 

Processor 

The transaction processer to which transactions are presented 

according to the Common Terminal Acquirer Protocol. This party 

subsequently passes the transactions on to the correct acquirer. 

Remote mode 

The mode in which the PIN pad may be operated remotely, by 

means of AdminLight. 

Subnet mask 

Using the subnet mask, a network administrator is able to 
determine which part of an IP address is the network ID, and 

which part is the host ID. Thanks to the subnet masks, routers in a 

network know at which physical segment a certain address is 

located, and whereto the data for that specific address are to be 
routed. 

Terminal Management System (TMS) 

System for the management and maintenance of point-of-sale 

terminals. 

Terminal Management System port 

Port via which a point-of-sale terminal has access to a TMS 

application. 

Terminal Management System Terminal ID (TMS 

TID) 

A unique identification number for a point-of-sale terminal that 

serves as a key for access to the TMS. 

Used PIN pad 

A PIN pad that has been installed and used before at a customer.

 

1.6

 

Related documents 

Document 

AdminLight – User manual 
Version 0.1 
October 2013 
CCV Services B.V. 

 

 

CID087A/15042015 

© CCV Services B.V. 

7 / 45 

 

Содержание VX 820 ITS














































Отзывы: