LCD330 Instruction Book
7
Protocol
Set the protocol of the LCD330 so that it matches that of the
PTZ camera you wish to control. Available protocols:
Pelco D / Pelco P / Samsung / MinKing / VIDO / Yaam / Molynx
/ CSR600 / Alec / Vicon / VideoTrec / AD 485 / DynaColor
/ MLP1 / MLP2 / KDT KB3 / KDT 405 / KDT 304 / LGM /
EVERFOCUS / FASTRAX / SANYO SSP / VCL / ADT / ERNA
/ SIEMENS / HEIJMANS / VISCA / VIDEOTEC / U MACRO /
HONEYWELL / TG.
Com
Set the communication port you wish to use. Available ports:
485 / 232 / 422
Rate (Baud Rate)
Set the baud rate used by the LCD330 so that it matches that
of the PTZ camera you wish to control. Available baud rates:
2400 / 4800 / 9600 / 19200 / 5100
Speed
Set the speed at which PTZs pan and tilt when being controlled.
001 (Min) ~ 016 (Max)
System Setup
In the System Setup menu you can view and confi gure
system information and PTZ control settings.
Idle Time
Set the period of time in minutes the device has to be inactive
before automatically turning off . To disable automatic power off
set the idle time to 000.
000 ~ 030
Battery
Displays the current battery level.
100 / 90 / 75 / 50 / 25 / 5
How To Confi gure System Settings
1.
At the main menu press
‘1
’ to enter ‘
SYSTEM SETUP
’.
1.
Press the ‘
OPEN/SET
’ to start setup. The fi rst menu option
will begin to fl ash on and off .
2.
Press the ‘
Up
’ and ‘
Down
’ key to highlight the desired
menu option.
3.
Press the ‘
Right
’ arrow to switch to the parameter for
selected menu item.
4.
Press ‘
Up
’ or ‘
Down
’ to change the selected parameter.
5.
Press ‘
Left
’ to save selection and return to menu item.
6.
Press ‘
Left
’ again to fi nish setup. The menu items will stop
fl ashing once setup is complete.
7. To return to the main menu press and hold the ‘
Menu
’
button for 1 second. The device will beep twice and
display the main menu.
