LCD330 Instruction Book
6
Battery & Power
Power Switch
The On/Off switch is located on the right hand side of the
unit. See
page 4
.
Auto Off
After a period of inactivity the LCD330 will automatically turn
off . To restart the device turn the power switch ‘
Off
’ and then
back ‘
On
’ again. To see how to set the length of time before the
device automatically turns off see
page 7
.
Battery Life
The LCD330 is fi tted with a high capacity battery providing
up to
10 hours of battery
life off of a full charge.
Charging
Only charge the device with the 9V DC PSU supplied. The test
monitor takes
6 hours to charge fully
. The charging indicator
will display a solid light when charging which will fl ash when
the device is fully charged. As a safety feature the LCD330 will
automatically stop drawing power when fully charged.
Checking Battery Level
To view the current battery level enter the ‘
System Setup
’ from
the main menu (option 1). ‘
Battery
’ is the last item on the page
and battery level is displayed in percent. The battery level will
be displayed as
100 / 90 / 75 / 50 / 25 or 5%
. It is recommended
that you charge the LCD330 when the battery level drops to
25% to prevent the battery dying during an installation.
Using The LCD330 When On Charge
You can still use all the features of the LCD330 whilst it is on
charge except the multimeter function.
Selecting Menu Item
To select a menu item simply press they corresponding
number on the keypad.
Note:
The fi rmware version and serial number can not
be selected.
Version & Serial Number
The fi rmware version and serial number of the product are
displayed at the bottom of the screen.
Main Menu
When the LCD330 is turned on the main menu will be
displayed as shown below.
