LCD330 Instruction Book
12
UTP Cable Testing Continued
Connecting The Network Cable Tester
To preform a network cable test you will need the small
Network Cable Tester supplied with the LCD330.
Plug one end of the cable into the ‘
UTP TEST
’ port on the right
hand side of the LCD330. Plug the other end of the network
cable into the Network Cable Tester.
The locations of the LCD330’s connections are highlighted on
page 4
. All of the accessories supplied with the test monitor
are displayed on
page 5
.
Connection Example
Network Cable
Network Cable
Tester (Supplied)
LCD330
Using The UTP Test Function
1.
At the main menu press
‘3
’ to enter ‘
UTP CABLE TEST
’.
2.
Press the ‘
OPEN/SET
’ button to begin cable test.
3.
The test results will be displayed allowing you to diagnose
any faults.
4.
To return to the main menu press and hold the ‘
MENU
’
button for 1 second. The device will beep twice and
display the main menu.
Video Generator
The video generator creates a composite video output to test
that monitors are displaying images and colours correctly.
What Is Displayed?
The ‘
VIDEO GENERATOR
’ will create a colour bar made up
of 7 diff erent colours. Alternatively 1 chosen colour can be
displayed full screen.
Connecting The LCD330 To A Monitor
Simply connect the LCD330’s ‘
VIDEO OUT
’ socket to the
monitors video input using the short BNC cable provided. If
the monitor does not have a BNC input you will need to use a
connector such as a BNC to Phono converter.
The locations of the LCD330’s connections are highlighted on
page 4
. All of the accessories supplied with the test monitor
are displayed on
page 5
.
Video Generator continues on next page
