AGC(AUTO GAIN CONTROL):
The higher the gain level, the brighter the screen makes the highter noise.
OFF : Deactivates the AGC function
LOW : Allows automatic gain control from "0 ~ 30dB.
HIGH : Allows automatic gain control from "0 ~ 42dB.
SENS-UP :
When it is night and/or dark condition, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
OFF : Deactivates the SENS-UP function.
AUTO : Activates the SENS-UP function.
RETURN
Select this is to save the changes in the EXPOSURE menu and return to SETUP menu.
10
CAUTION
To produce better results with A.FLK, do not use it in conjunction with WDR
mode of the BACKLIGHT menu
When the SHUTTER is set to ESC after selecting the internal Syncronization type.
the picture may become unstable if the camera faces a bright fluorescent light.
So there is needed take care when choosing the installation position
ESC and MANUAL modes are only available together when the lens is set to
MANUAL.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
LIMIT
AUTO X 2
Press SET to Return
CAUTION
If press the SET button in "AUTO" mode, the brightness could be adjusted by
increasing or decreasing the shutter speed. (X2 ~ X256)
Note that the higher zoom level, the brigher the screen, but the more likely it is that
an after - image will appear.
Although Noise, Spots and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal operation.
