3-2) Set up the mode using the 4 direction buttons.
①
SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
Motion detection sensitivity in increase to recognize even small movement.
②
AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
③
SEL POS : Detemines which of the 4 vertice of each MD area is to be used.
④
YPOS : Determines the coordinate of the vertical axis for SEL POS.
⑤
XPOS : Determines the coordinate of the horizontal axis for SEL POS.
⑥
FILL
→
SET : Fills in a selected MD area. The color of filling is sequentially selected
as brown, orange, blue, cyan, yellowish green, yellow and red.
⑦
RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
4. PRIVACY
Hide an area you want to hide on the screen.
4-2) Set up the area mode using the 4 direction buttons
①
AREA SEL.: You can select up to 8 MD areas.
②
AREA MODE :
Determines whether to use the area selected in the AREA SEL, and the size
and the position of the area.
22
4-1) When the SPECIAL menu screen is displayed, press the UP and DOWN buttons to adjust " PRIVACY "
CAUTION
MD areas show just MOTION DET menu. MD areas doesn't disply on the monitor screen.
1. AREA SEL
2.AREA MODE ON
4.TRANSP. l l 0
5. Return
3.MASK COLOR GRAY
PRIVACY
1.TOP l l 12
AREA SETUP
2.BUTTOM l l 27
3.LEFT l l 45
3.RIGHT l l 30
Press SET to Return
