3. Select a desired mode using the Left and Right buttons and press the SET button.
Select "WDR" to adjust the WDR LIMIT and LEVEL.
LIMIT : Adjust the WDR Sensitivity by selecting LOW, MIDDLE or HIGH.
LEVEL : Adjust the WDR Brightness by controlling the bar fro 0 ~ 100.
Select " BLC " to adjust the area to be enhanced and enhancement level.
13
WDR LIMIT
LIMIT MIDDLE
Press SET to Return
LEVEL 50
B L C SETUP
Press SET to Return
BOTTOM 82
T O P 27
L E F T 42
RIGHT 42
LEVEL MIDDLE
CAUTION
You cannot use the WDR mode when MANUAL or A.FLK mode in " SHUTTER "
menu is selected.
Since the following symptoms may occur according to the ambient illumination when
WDR is selected, set it to OFF.
Color or Screen changes unnatually.
Noise appears in the bright part of the screen.
Since the performance of the WDR function may be affected by the area of the bright
part of the screen, optimize the installation angle for the best WDR performance.
If you increase LIMIT, the screen display may be distorted.
For the performance of WDR function, using DC IRIS lens rather than manual lens is
recommended
