CCT730 V1.1
13
Monitor
1 Brightness
125IIIIIIII
2 Contrast 190IIIIIIII
3 Saturation
188IIIIIIII
4 Hue 133IIIIIIII
5 Live Refresh Rate Auto
6 Screen Center Point
7 Screen H-Size
8 Background Colour
9 Show Colour Bar
10 Exit
6.2.4 OSD/ Timer – PB Date/ Time Position
This item allows you to move the current Date/ Time Display to any position on your screen. Use
the directional arrow buttons to move the Date/ Time display around your screen.
6.2.5 OSD/ Timer - RS485 Time Calibration
RS-485 is used for multi-point communications: many devices can be connected to the same
bus. Move to this item and press the ETNER button, all CCT730 timers will be synchronized.
6.2.6 OSD/ Timer - Call Monitor Dwell
The call monitor display is always full screen switching of all the installed cameras, this item
allows you to set the Dwell Time between switching. The timer value ranges from 1 to 255
seconds.
6.2.7 OSD/ Timer - Text Colour
This item allows you to select from 16 different colours for the Date/ Time display.
6.2.8 OSD/ Timer - Display Type
This item allows you to select one from 6 different text types (reverse, bold…) for the Date/ Time
display.
6.2.9 OSD/ Timer – OSD Display
This item allows you to select which information you wish to display; you can choose from
•
T&D/T(camera title and date/time);
‚
Title;
ƒ
D/T(date/time);
„
OFF.
6.3.Monitor Menu
This menu allows you to adjust the quality of the displayed image.
6.3.1 Monitor - Video Setup
Items 1~4 involve adjusting the brightness, contrast, saturation and hue of the attached
cameras. Use the front panel arrow buttons to adjust these values.
6.3.2 Monitor- Live Refresh Rate
This item allows you to set-up the camera refresh rate on the Main monitor; use the right/ left
arrow buttons to select between Fix or Auto. “Fix” means each camera has the same refresh
rate. “Auto” means the camera where more motion is detected will receive a higher refresh rate
automatically.
