CCT730 V1.1
10
Sequence_1 Set Up
1
Pages 16
11 Page 8 5
2
Mode 0
12 Page 9 5
3
Timer Ind.
13 Page 10 5
4
Page 1 5 14 Page 11 5
5
Page 2 5 15 Page 12 5
6
Page 3 5 16 Page 13 5
7
Page 4 5 17 Page 14 5
8
Page 5 5 18 Page 15 5
9
Page 6 5 19 Page 16 5
10
Page 7 5 20 Exit
again to increase the fast forward speed: x1 x2, x4 and x8.
2. In playback mode, you can also press and hold this butto n for 3 seconds to move
automatically to the end of the recording.
ENTER / ZOOM
8
1. In the menu screens, this button is used to “ENTER” a sub-menu or to confirm a command.
2. In full-screen mode where a live or recorded image is being displayed in full-screen, you can
also use this button to zoom (x2) into the image and then use the arrow buttons on the front
of the unit to move around the “zoomed” image. In this mode the button will be illuminated.
SET
In a split-screen display, press this button to enter SET mode where each of your cameras can
be assigned a Channel. These will relate to the Channel numbers/buttons on the front display of
the CCT730. The SET menu will appear with a cursor flashing over the first image/window. Use
the arrow buttons
tupq
to move the cursor to the desired camera image and then press the
desired CHANNEL or Number button to assign the camera. The cursor will move on to the next
window automatically. Press the ESC button to exit this mode.
SEQ
1. Press this button to start sequencing through the camera images
and press it again to stop sequencing. The SEQ button will be
illuminated as well as the camera channel on display when the
unit is in sequencing mode.
2. A number of different sequencing options can be obtained with the
CCT730. These options are set up using a menu, which can be
accessed by pressing the SET button whilst in the sequencing
mode. The number at the top of the menu indicates which Sequence you are setting up.
Pages -
this allows you to decide the total number of pages/images to be used in the
sequence. The maximum value is 16, which means that each sequence can have up to 16
pages/images.
Mode -
this item allows you to decide which display mode will be used in this sequence.
“0“ represents full screen mode and “7” represents the 16-windows mode.
Sequence Timer -
this item allows you to select “Com” or “Ind” Sequence Timer. “COM”
means every page in this sequence has a common dwell time; whilst IND means that each
page can have an individual dwell time.
Dwell Time and Page Setup –
this allows you to set up the dwell time of each page. If the
sequence timer is selected as “COM”, once yuou change the dwell time of one page, the
dwell time of all the other pages will be changed as well. If the sequence timer is selected
as “IND”, the dwell time value can be changed individually page by page.
Using the arrow keys, move the cursor down to one of the page numbers and use the
