Dial #
0000 + 185 TT #
Where, TT= 01-99 (04 means 0.4 Secs)
Default: TT= 04
Operating Procedure:
The door Lock can be operated in 2 modes.
1. While talking to the Door Phone, Press
1 for the first Door Lock and
2 for the second Door Lock.
2. Directly
:
Lift Handset and dial #18 or #19
Note:
This feature has been taken off from 416S model. However, this feature can be optionally given in 416S by
connecting “Extension to Door Lock Converter”
.
Emergency Call
.
When any extension dials # 88, all extensions start ringing. All extensions get connected to the extension who had dialed
the Emergency code. All can talk in conference.
.
Extension to Extension call
.
Extension numbers in default are from 601 to 608 and can be changed to 1 digit, 2 digit, 3 digit or 4 digits numbering as
explained under the heading “Flexible Numbering”.
.
Flash Time setting
.
The Flash time of the PBX can be changed as described below:
Dial #
0000 + Dial 00 L #
Here, L= 1 (for 0.8 secs)
2 (for 1.0 secs)
3 (for 1.2 secs)
4 (for 1.5 secs)
5 (for 1.8 secs)
.
Flexible Numbering
.
Extension numbers can be changed to a desired number of 2 digit, 3 digit or 4 digits from 1
– 8999.
The numbering can either be 2digit, 3 digits or 4 digits and not in combination.
Procedure
:
Dial #
0000 + 9000 + # (This also resets all the flexible numbering of the PBX)
Dial #
0000 + 9 NN ABCD #
Where, NN = Last 2 digits of the original extension number (This original number always remains the one
that is printed on the MDF even if flexible numbering is done).
ABCD = The new Extension number. For less than 4 digits, dial # at the end Of Extension Number.
If all the new numbers to be made in sequence then following programming can be done with single program. This avoids
lengthy programming:
Dial #
0000 + 9000 L K #
Where, L = Length of new numbers
– 3 digits or 4 digits
K = First digit of the new numbering. If K=2 then the numbering will become 201 (or 2001)
onwards. Then all those Numbers can be changed through the above programming.
Notes
:
If only few extensions are changed to 2 digit numbering and rest are 3 digit then 2 digit extensions can
intercommunicate but 3 digit extensions will not be accessible (They will become engaged). However, 3 digit
extensions can dial to 2 digit extensions and talk.
.
Hold Music (11 Types)
– Not in 432S
.
There are 11 Hold Music preprogrammed in the PBX. Any one of them can be assigned or they all can be assigned to play
all the 11 Music in sequence, one by one.
To assign Hold Music
:
Dial #
0000 + 141 XX #
Where, XX= 01 to 11 (Representing 11 type of hold music)
= 00 (To make the Hold Music play in Sequence one by one)
To listen to the 11 type of Hold Music
:
Dial # 67 KK
Where, KK = 01
– 11
External Hold Music
External Hold music can be connected to the PBX by terminating the external source on 3 Pin Stereo Jack marked as
“Music” on the PBX side panel. On inserting a 3 Pin Stereo Jack, the internal source gets disconnected.
.
Hold Music - Volume Setting
.
The volume of the hold Music can be altered by the user.
Procedure
:
Dial #
0000 + 145 PP # Where, PP= 00
– 15. (Max volume level is 15)
.
Hot Line to Junction
.
