CCI Thermal Technologies Fastrax G Series, Руководство по установке и эксплуатации, Страница: 30 / 63

Fastrax
TM 1.855.244.3128 Fax: 1.303.979.7350 sales@fastraxind.com www.fastraxind.com
30
Figure G.4.1 - Typical Extension Control
Panel
Figure G.4.2 - Typical Master Control Panel
G.5 FAS1A AERIAL SNOW SENSOR WIRING
1.
Mount and install FAS1A sensor and wire as instructed
in the Control Panel section of this manual.
2. Locate the wiring diagram for your panel style in this
section. FAS1A sensors are only connected to master
or stand alone panels.
3. Leaving extra slack in the panel cut the sensor wire to
comfortably reach their designated terminals. Strip the
insulation from each conductor leaving about 5/8” bare
wire. Connect the wire colors as per Table G.5-1.
Table G.5-1 Wire Descriptions
Wire Color Description
Terminal
Number
Black Common 60
White Signal 61
Red Supply 62
Green Supply 62
Figure G.5.1 - FAS1A Aerial Snow Sensor
Figure G.5.2 - Terminal Connections