CCI Thermal Technologies Fastrax G Series, Руководство по установке и эксплуатации, Страница: 20 / 63

Fastrax
TM 1.855.244.3128 Fax: 1.303.979.7350 sales@fastraxind.com www.fastraxind.com
20
1. Place clamp on field side of rail
base with swivel screw backed
completely out.
2. Push the bottom of the clamp
body firmly until it clicks into place
on the base of the rail. (Note:
pushing on the top of the clamp
will prevent it from seating on the
rail).
3. The end of the clamp body will
wrap around the gage side of the
rail when seated properly.
4.
Tighten each clamp by turning the
swivel screw with an Allen wrench
until the spring clamp U shaped
edges surround the heater and are
snug against the rail.
5.
Tighten the keps nut.
6.
Tie off the tow hook at the heater
‘dead end’ with the stainless steel
wire tie provided with the spring
base clamp kits.
9. Leave swivel screw and spring clip backed away from rail and slide heater in place.