PHENIX
Technical Manual
v2.0
CCEI
page 12
ELECTRICAL CONNECTION
Before connecting the PHENIX to the mains, it is essential to check the power
protection using a 30mA differential device.
The power supply must be permanent and properly protected against any possible
overvoltage and overloads.
Installing PHENIX with a CCEI LIMPIDO chlorinator:
The PHENIX fits, in series, between the flow detector (supplied with the LIMPIDO)
and the LIMPIDO.
Connect the LIMPIDO flow detector to the PHENIX “Flow detector” input (under the
cabinet on the left).
Connect the control cable supplied with the PHENIX between the PHENIX control
output (under the cabinet, on the right) and the LIMPIDO “Flow detector” input
Limpido WITHOUT PHENIX
Limpido WITH PHENIX
The power supply must be permanent and properly protected against any possible
overvoltage and overloads.
LIMPIDO
flow
detector
LIMPIDO
chlorinator
Flow detector
supplied
with
the LIMPIDO
Control cable supplied with the
Phenix (cut into 2 identical
parts: one for the input and the
other for the output
