ENGLISH
10
➢
The lamp position can be
adjusted by rotating the same
with respect to the standing
surface once the two M3 screws
on each side have been loosened.
Once the right position is found,
tighten both screws (see picture
hereunder).
Installation with CLIP36
➢
Fasten the metal clips to the
dedicated installation structure.
➢
Clip the lamp and adjust the light
beam direction.
Damaged or broken lamp.
➢
When side mounting the lamp
ensure to never completely
loosen the M3 screws allowing
for lamp rotation, to avoid having
the lamp fall down.
➢
The side fasteners must be
checked on a regular basis and
the M5 screws on the brackets
tightened to the machine surface.
NOTE: The mounting parts for this
lamp are available as accessories.
Please For further details, please visit
our website:
NOTICE
Installation
