ENGLISH
5
explosion. It might cause severe body
injuries.
➢
Do not
install and use this
product
in
hazardous
environments
(high
risk
of
explosion).
Installation and safety
➢
Handle the lamp with care and
avoid having it drop or being hit
even it is still packed, which
might cause body injuries, as
well as material damages.
➢
Ensure the original mounting
accessories are used, as available
from the manufacturer.
➢
Set up the mounting accessories
properly.
➢
The equipment must be correctly
fastened using the proper screws
according to the application,
place and surface where the
product is being mounted.
➢
Ensure that the fastenings are
regularly checked.
Danger of dazzling glare due to a
white light source
Avoid staring directly at the light
source, as it may cause a temporary
reduction of vision. Irritation, aches,
damages or accidents may as well
occur.
➢
Avoid staring directly at the light
source.
➢
The device must be adjusted so
as to avoid having the light flow
directed towards the eyes.
Danger caused by inappropriate
spare parts.
Using inappropriate spare parts may
cause bodily injuries and material
damages.
➢
Do not
use spare parts that have
not
approved
by
the
manufacturer.
Damage caused by the presence of
laser beams
Use of the T-LED LED lighting
equipment
is not
allowed when a
high-power laser
–
see: a laser
cutting system - is operating, since it
may damage the LED source.
Danger due to high temperatures
Installing and using the equipment in
all the environments where the
existing
temperature
remarkably
exceeds the foreseen operating
temperature will considerably reduce
LED lifetime while damaging as well
the built-in electronic components.
➢
Do not
use this Device in
environments
where
the
operating temperature of the
device is exceeded.
➢
Operating temperature -
4/+113°F (-20/+45°C)
➢
Avoid direct solar radiation.
Danger due to repairs
Having the product disassembled or
repaired without any appropriate
technical /electrical knowledge may
cause damages to persons and
objects.
Safety Warnings
