CBS ArcSafe RRS-2, Техническое руководство

Страница: 39 / 45

RRS-2 Technical Manual 35
© 2009 CBS ArcSafe
®
2012-04-18
Appendix D: Radio Remote Pendant
Station
1.0 Components
Radio Remote
– The radio remote allows for the use of a radio remote pendant station in order to control the
operation of your RRS.
ATTENTION
The radio remote pendant station is designed specifically for the system that it came with.
The radio remote will NOT work with any other CBS ArcSafe® Remote System, therefore
please keep the radio remote with the system that it came with. Also to limit interference
please ensure that the channel numbers of units purchased at different dates differ.
Radio Remote Receiver
– The radio remote receiver receives the radio remote signals needed to control the
RRS. The radio remote receiver is attached to the system and although it is quite sturdy, care must be
taken to ensure that during movement the remote receiver is not damaged. The radio remote
receiver is powered by 2 AA batteries in the internals of the unit.
Figure D.1 – Available radio remote pendant station models
1. PS-R4 2. PS-R6 3. PS-R6-C ______